Note: Paxar is formerly Monarch.
Paxar MPCL1 Label Options
|
Horizontal Copies |
The number of copies to print across the supply. |
|
Cut/Take-Up |
§ Use PSO Cut Option – Uses the Cut/Takeup option selected in the device Options dialog box. Setting the cut option in the Label Options dialog box provides label specific cutting options. Whereas, setting the Cut/Takeup option in the device Options dialog box produces the same behavior for all labels printed on that specific printer. § Cut each label, except last - This option only works with labels 4 to 8 inches in length. § Cut each label, including last - This option only works with labels 4 to 8 inches in length. § No Cut/No Rewind - When enabled, does not allow label to be cut, nor does it rewind after printing. |
|
Format Number |
The number of the Monarch Printer Control Language (MPCL) format to use. Refer to your MPCL documentation for more information. |
Paxar MPCL1 Printer Options
Label Options Section
|
Cut/Takeup |
§ Cut After Entire Batch Only – When enabled, cuts after the last label in the batch has been printed. § No Cut/No Rewind – When enabled, does not allow label to be cut, nor does it rewind after printing. § Cut each label, except last - This option only works with labels 4 to 8 inches in length. § Cut each label, including last - This option only works with labels 4 to 8 inches in length. |
Note: There are extensive differences in the cut behavior between Extended and Native Modes with the 98XX Series Printer. Information regarding the expected behaviors for each is found in Loftware website’s Knowledge Base under LLM | Printing | Printing Problems.
|
Label Mode |
§ Separator Off - No separator prints between batch jobs. § Normal Length Separator– A normal length separator with 3mm black stripe prints between batch jobs. § Double Length Separator - A double length separator (typically used for 924 or 925 stacker) prints between batch jobs. On the 920 stacker, a 3mm extra length tag prints between batch jobs. § Extra Length Tag – A 3mm extra length tag with 6mm stripe prints between batches. |