This section provides information specific to the Avery family of printers. RFID Printers (currently supported or in development) are italicized in shaded table cells. The Avery printers include:
|
6404 |
6404 ALT |
6405 |
6405 ALT |
|
6406 |
6406 ALT |
6408 |
6408 ALT |
|
ALX 924 |
ALX 925 |
ALX 926 |
AP 4.4 |
|
AP 5.4 |
AP 5.4 ALT |
AP 7.t textile |
DPM 4 |
|
DPM 5 |
DPM 6 |
S-262 |
S-362 |
|
S-462 |
TDI |
TDI ALT |
TTK |
|
TTK ALT |
TTX 1050 |
TTX 1050 ALT |
TTX 300 OFL |
|
TTX 300 OFL-ALT |
TTX 300 ONL |
TTX 300 ONL-ALT |
TTX 350 |
|
TTX 350 ALT |
TTX 450 |
TTX 450 ALT |
TTX 650 |
|
TTX 650 ALT |
TTX 674 |
TTX 674 ALT |
TTX 675 |
|
TTX 675 ALT |
TTX 950 |
TTX 950 ALT |
|
|
6404 RFID |
6405 RFID |
6406 RFID |
6408 RFID |
|
ALX 924 RFID |
ALX 925 RFID |
ALX 926 RFID |
DPM 4 RFID |
|
DPM 5 RFID |
DPM 6 RFID |
|
|
Updated printer information is available at Loftware’s website, www.loftware.com. See Supported Printers on the Technical Support page.
Refer to the RFID Devices and Tag Types section for information on tag types supported by the Avery RFID printers.
Interface Cables (Parallel, Serial, and USB)
These printers usually have a serial interface and a parallel interface. Some models support USB and have NIC Ports.
Parallel Interface (standard interface) - Using a standard parallel cable, plug the hardware license key into a LPT parallel port, and connect the cable between the key and the printer.
Serial Interface (standard interface) – Check with manufacturer for cable information. The hardware license key is not part of the serial interface since it must always be plugged into an LPT parallel port.
USB Interface (standard or optional interface) – Use a standard USB cable between the printer and computer (or server), and plug in either a USB or Parallel hardware license key to one of the other ports on the computer.
Network Port – Included or optional on some printers.